TDUOP AIR
Design

    Merkel complete piston with steel base and vulcanised sealing lips with special pneumatic sealing edges. The design, with radial venting passages on the front sides facilitates reliable pressure application at the end of the stroke.

    • Ready to fit complete piston to which pressure can be applied on both sides with integrated guide
    • Easily fastened to the piston rod without additional sealing components
    • Long service life
    • Low start friction due to optimised sealing lip geometry and supported by additional venting passages
    • Constant good sealing behaviour over a wide pressure range (to 1.2 MPa)
    • Simple provisioning
Material

    Seal: NBR Rubber - 72 NBR 708 - 72 Shore A

    Base plate: mild steel according to DIN 1624

Application

    Pneumatic cylinders

Fluids

    Prepared, dried and de-oiled compressed air (after greasing for fitting)

 
Page of  
Product Code
Description
Availability
Qty
TDUOP AIRM-018100-250 18.00 x 100.00 x 25.00mm 72 NBR 708 Pneumatic Piston Seal
17
TDUOP AIRM-018125-300 18.00 x 125.00 x 30.00mm 72 NBR 708 Pneumatic Piston Seal
0
TDUOP AIRM-020100-250 20.00 x 100.00 x 25.00mm 72 NBR 708 Pneumatic Piston Seal
16
TDUOP AIRM-024160-300 24.00 x 160.00 x 30.00mm 72 NBR 708 Pneumatic Piston Seal
0
TDUOP AIRM-024200-300 24.00 x 200.00 x 30.00mm 72 NBR 708 Pneumatic Piston Seal
7
 
Page of