TDUOP AIR
Design

    Merkel complete piston with steel base and vulcanised sealing lips with special pneumatic sealing edges. The design, with radial venting passages on the front sides facilitates reliable pressure application at the end of the stroke.

    • Ready to fit complete piston to which pressure can be applied on both sides with integrated guide
    • Easily fastened to the piston rod without additional sealing components
    • Long service life
    • Low start friction due to optimised sealing lip geometry and supported by additional venting passages
    • Constant good sealing behaviour over a wide pressure range (to 1.2 MPa)
    • Simple provisioning
Material

    Seal: NBR Rubber - 72 NBR 708 - 72 Shore A

    Base plate: mild steel according to DIN 1624

Application

    Pneumatic cylinders

Fluids

    Prepared, dried and de-oiled compressed air (after greasing for fitting)

 
Page of  
Profile
Application
ID
OD
SH
LI
Part No.
Max Pressure (PSI)
Max Temp. (c)
Max Speed (m/s)
Alt Reference
Availability
Qty
TDUOP AIR
8.00
25.00
12.00
406238
100
80
TDUOP AIR
8.00
32.00
15.00
406239
100
162
TDUOP AIR
10.00
40.00
18.00
406241
100
55
TDUOP AIR
10.00
50.00
18.00
406245
100
65
TDUOP AIR
12.00
90.00
24.00
406275
100
30
TDUOP AIR
14.00
63.00
22.00
406246
100
40
TDUOP AIR
14.00
80.00
25.00
406250
100
20
TDUOP AIR
16.00
63.00
22.00
406248
100
45
TDUOP AIR
16.00
80.00
25.00
406266
100
23
TDUOP AIR
18.00
100.00
25.00
406277
100
20
TDUOP AIR
18.00
125.00
30.00
406280
100
10
TDUOP AIR
20.00
100.00
25.00
406279
100
20
TDUOP AIR
24.00
160.00
30.00
406282
100
10
TDUOP AIR
24.00
200.00
30.00
406288
100
11
 
Page of